Arctic Epoxy Acrylate Styrene Free Chemical Anchor

Characteristics
• High performance, rapid curing, one shot, two part chemical anchoring system based on a low odor resin.
• Specially developed using a high reactivity resin enabling it to be used at temperatures below -18°C. The resin has a lower viscosity than standards resins allowing it to be extruded in low temperature applications.

Benefit
• Suitable for very low temperatures
• Suitable for underwater applications and wet holes
• High chemical resistance
• Can be extruded if the cartridge temperature is below -18°C
• Very low odor
• Suitable for close edge applications
• High durability
• Ideal for cold room usage
• Cartridge can be used up to the end of the validity date by replacing the static mixer or releasing cartridge with the sealing cap
• Patented self sealing cap
• Absolutely no leakage

Suggestion for use
Hammer drilled-blown and brushed with a stiff metal brush and blown again

IMPORTANT NOTE:
The above information is believe to be correct but does not purport to be all inclusive and shall be used only as a guide. Vorpa shall not be reliable for any damage resulting from handling or from contact with the above product.