VORPA

JANUARY 2012 - NEW KLINKER DRILL FOR PORCELAIN GRES

vorpa — Tue, 10 Jan 2012 06:00:48 +0000

New KLINKER special drills to be used with perforating hammers suitable for porcelain gres, granite, Klinker and hard materials. Use at high speed without percussion.

-Easy to use
-Possibility to drill with no water at low speed
-High performances on pocerlain gres whose hardness is PEI 5 – performances are proportionally better on materials of inferior hardness.

Contact our sale department for any further information you may need and to ask for the related technical data sheet.

JANUARY 2012 - NEW ISOPHONIC QUICK PIPE CLAMP FLIP

vorpa — Tue, 10 Jan 2012 06:00:23 +0000

New Isophonic pipe clamp characterized by EPDM chemical adhesion granting a quick fixing of iron and polyethylene pipes. High vibration absorption and loading capacity, very good corrosion resistance.
Suitable to be fixed with joint screws M8 and/or M10 and countersunk flat head screws 6×70. FLIP clamp is light, resistant, easy to use and safe.

Contact our sale department for any further information you may need and to ask for the related technical data sheet.

December 2012 - New hammer drill bit SDS TURBO

vorpa — Tue, 06 Dec 2011 12:00:59 +0000

Innovative X-head design with 4 cutting edges for fast and professional jobs.
Resistant against reinforced concrete
Considerably less friction
faster removal of drill dust and optimum start of drilling
Symmetric X-shape produces higher drilling speed in comparison with classicl 90°design.
4 cutting edges with extended full carbide plate-edges provide precise and cylindric holes.

Ask for sale departement any further information you may need

December 2011 – New hexagonal double threaded nuts

vorpa — Thu, 01 Dec 2011 06:00:58 +0000

Hexagonal nuts for double threaded joints.
They can be used with double size bars. Available in three different versions with thread:

- M6-M8
- M8-M10
- M10-M12

Ask for sale department for any further information you may need.

November 2011 – New stainless steel fixings for flashing works applications

vorpa — Tue, 01 Nov 2011 06:00:24 +0000

New nylon fixings with copper-plated or dark-brown stainless steel screw. Completed with washer Ø 20 mm and vulcanized rubber. Available size 6/40 with countersunk head plug. For hammer-in flashing works applications.

Ask for sale department for any further information you may need.

October 2011 - New ISOTHERM system for spaced loads on insulated buildings

vorpa — Wed, 05 Oct 2011 15:26:53 +0000

New system composed of self-drilling hexagonal adaptor assembled on joint screw and nylon plug, suitable for safe fixings on wall covered by insulation materials. Available in three different models:
- Provided with female internal thread M6-M8
- Provided with threaded stud M8 and nuts
- Provided with threaded stud M10 and nuts.
Particularly indicated for applications of suspended loads on insulated buildings. Quick and easy installation. Suitable for any kind of base material, this system prevents the thermal bridge phenomenon and it grants an excellent corrosion resistance.

Ask for sale department for any further information you may need.

October 2011 - New hexagonal copper plated spacers for clamps

vorpa — Wed, 05 Oct 2011 09:46:39 +0000

New hexagonal copper plated spacers (spanner 11) for the fixing and installation of clamps.

Ask for sale department for any further information you may need.

OCTOBER 2011 - New steel fixing to be used with chemical anchors on hollow materials

vorpa — Wed, 05 Oct 2011 09:45:03 +0000

New perforated steel sleeve indicated for a safe fixing of brackets on hollow materials. To be used with chemical anchor on hollow bricks and hollow blocks, CLOU sleeve grants a working load 2/3 times higher than an application with a nylon sleeve 12×130. The mixer extension enables to insert the resin inside the steel sleeve CLOU entirely. The practical closing cap makes the fixing pleasant from an aesthetic point of view.

Ask for sale department for any further information you may need.

October 2011 - new nylon self drilling fixing for the application on insulation materials

vorpa — Tue, 04 Oct 2011 12:09:29 +0000

The new self drilling fixing IPL is indicated for the applications on masonry covered by rigid insulation panels. Made of paintable nylon chemical agents resistant, the new IPL fixing grants easy, safe and quick applications by simply using a T40 bit with no need to pre-drill. It prevents the thermal bridge phenomenon and avoids heat waste.

Ask for sale department for any further information you may need.

February 2011 – New Technical Guides for Heavy Duty Anchors and Chemical Anchors

vorpa — Wed, 16 Feb 2011 11:18:21 +0000

New Technical Guides for the installation of Vorpa Heavy Duty Anchors and Chemical Anchors are now available.
• New publications containing all technical details
• New solutions for your fixings
• Anchors with European Technical Approval
• Simple and quick answers for each fixing problem

Enter customer area and print your copy or ask for CD to Vorpa customer service